1 x 7809 9V regulator
1 x Barrel plug power jack
3 x 1/4" jack [568-NYS234-3]
1 x 1/4" jack with switch [568-NYS234]
2 x 100k pots [31VQ501-F]
2 x 1k pots [31VQ301-F]
6* x 500k pot [31VQ505-F]
2 x 10k pot [31VQ401-F]
12 x knob covers
2 x 330 ohm resistor [291-330]
8 x 1k resistor [291-1k]
2 x 2k7 resistor [291-2.7k]
6 x 100k resistor [291-100k]
10 x 220k resistor [291-220k]
2 x 470k resistor [291-470k]
7 x 1M resistor [291-1M]
4 x 1uF cap [140-XRL25V1]
5 x 10uF cap [140-XRL25V10]
1 x 100uF cap [140-XRL25V100]
2 x 0.01 cap [140-50Z5-103M]
2 x 330pF cap
4 x IC sockets [575-993308]
2 x 4558 opamp IC [513-NJM4558D]
2 x 072 opamp IC [511-TL072IN]
2 x round LED [351-5500]
2 x LED clips
2 x rect LED [604-L113HDT]
2 x CdS cell: approx. 5k light, 500k dark (Jameco #202391, or electronic-goldmine #G15177)
2 x SPDT toggle switches [1055-TA1130]
4 x Diodes (Si) 1N914 or equic.
2 x 3PDT stomp

box
wire
rubber feet

*If doing FINE instead of SYM, replace each 500k SYM pot with a 10k FINE pot. Also, omit the Si Diodes.